Nickel Alloys Seamless Pipes and Tubes

Nickel Alloys Seamless Pipes & Tubes

Petroinox Private Limited has a facility specialised to the production of Nickel Alloy Seamless Tubes.

The plant has a Water Hydraulic Hot Extrusion Press with a capacity of 1750 MT. The company's fundamental competency is their Hot Extrusion Press, which allows it to make Mother Hollows with tighter dimensional tolerances and a better surface polish. Ratnamani is self-sufficient in the production of Mother Pipes containing a unique chemical.

Nickel Alloy Seamless Heat Exchanger Tubes are manufactured using Hot Extruded Mother Hollows. High-speed Cold Pilger Mills and contemporary Draw Benches are used to make the tubes. Off-Line Bright Annealing / Conventional Annealing furnaces are used to heat treat the tubes.

Petroinox Private Limited can provide tubes with reduced residual stress values, which is critical for the service life of high-pressure heat exchanger tubes.

Petroinox Private Limited has a dedicated facility for producing U bend Solution Annealed Tubes up to 40 metres in developed length.

Outside Diameter Range 6.00 MM to 76.00 MM OD
Wall Thickness Range 0.7 MM to 6.00 MM
Length 3Mtr to 12Mtr
Grades UNS N04400, N06600, N06625, N08028, N08800, N08810, N08825
Specification SB 163, SB 167,SB 407, SB 423, SB 444 U-Tubes as per Customer's Drawing. Tubes can also be supplied as per AFNOR, GOST, JIS, EN specification.
Supply Condition
  • - Bright Annealed / Solution Annealed & Passivated
  • - Stabilization Heat Treatment
  • - Straight / U bend condition having developed length upto 40 meters
Testing & Inspection
  • Mechanical Testing & Chemical Analysis
  • Fully equipped laboratory for Corrosion Testing, Chloride Contamination Testing, Bath Analysis Testing, Die Penetrant Test & Residual Stress Measurement
  • Micro Structure Examination / Analysis
  • Laboratory Spectrometer & Portable Spectrometer
  • Positive Material Identification [PMI] Tester
  • Hydro Testing –SS Straight & U-Tubes and CS Pipes
  • Air Under Water Testing – Straight Length upto 30 Meters
  • Ferrite Content & Surface Finish
  • Fibroscope – Inside surface checking of Tubes having outside diameter 4.7 MM and above
  • Surface Roughness Testing
  • Non Destructive Testing offered
    • Eddy Current Testing
    • Ultrasonic Testing with full body thickness measurement
    • Real Time Digital Radiography Testing
    • Conventional Film Radiography
Application
  • Oil & Gas Exploration
  • Petrochemicals and Refineries
  • Fertilizer Plants
  • Chemical Industries
  • Thermal, Nuclear and Solar Power Plants
  • Atomic Energy
  • Desalination Plants
  • Aerospace
  • Defence
  • Pharmaceutical
  • Food and Dairy
  • Automobile
  • Sugar
  • Paper Industries
  • Marine
  • Cross Country Pipe Line for Gas & Water
  • Pipes for Engineering purpose